Golden AutoDrive 3.0 PR510, PR535, PR756, PR505

(Click to see larger image and other views)

SKU: P118NA

Brand: Golden Technologies Parts

P118NA Golden AutoDrive Hand.Control. Fits most two motor Maxicomfort Models. See the models it fits and the reset guide below.

Chair Brand: Golden Technologies

Chair Brand: Med-Lift & Mobility

Part Type: Hand Control

Manufacturer: Okin

$98.75

List Price: $125.00

You Save: $26.25 (21%)

Previous Item

Next Item

Product Details

Golden AutoDrive Hand Control for use with Golden Lift Chairs.

Fits these models of Golden Technologies Lift Chairs:

PR712

PR713

PR510-SME

PR510-MLA

PR756MC

PR756L

PR508M

PR505JP

PR505S

PR505M

PR505

PR-505TAL

PR535-PSA

PR535-MED

PR535-LAR

PR535-TAL

PR736

PR735

UC556

Please click here to view the instructions for this hand control.

Factory Reset for hand control for PR505's, PR535's, PR756, PR510's, PR632 and PR512

1. Press and hold the program button M or P (SP). The backlight goes off while the button is pressed.

2. In about 4 seconds the backlight will start flashing.

3. Within 5 seconds press the button (Sl) which is the down triangle under the headrest drawing. The backlight will change to non-flashing.

4. Within another 5 seconds press the button (S4) which is the down triangle under the legrest drawing. Factory reset is done.

Refer to the drawing of your hand control on page 77 of the Service Guide to view these button assignments for SP, S1, and S4.

If button (S1) is not pressed within 5 seconds, or a different button is pressed,

then the programming sequence is aborted and you’ll need to repeat steps 1 to

4 above.